Aquarium Forum banner

1 - 10 of 10 Posts

·
Marine Aquarium Expert/Saltwater Section Mgr.
Joined
·
355 Posts
Discussion Starter · #1 ·
Just need some info on wet saws . What HP do i need and what kind of blade? To frag with THANKS
 

·
Registered
Joined
·
123 Posts
I've never needed more than a chisel and pliers to frag. What is it that you are fragging than needs such heavy equipment?
 

·
Marine Aquarium Expert/Saltwater Section Mgr.
Joined
·
355 Posts
Discussion Starter · #3 ·
acans, favia etc. It makes a nice cut where I want it to cut.
 

·
Registered
Joined
·
123 Posts
I know an Acan "farmer" and now that you mention it I have seen him use a small portable wet saw. It was a small black & yellow plastic jobber. I'll ask him tomorrow what model & stuff if you would like.
 

·
Marine Aquarium Expert/Saltwater Section Mgr.
Joined
·
355 Posts
Discussion Starter · #5 ·
That's cool of you THANKS
 

·
Registered
Joined
·
123 Posts
OK, I was curious so I called him. He says he uses a Roberts QEP 60084A with a 6-4003CR diamond continuous rim blade.

I have no idea what any of that means but he says it works really well for him and is easy to clean and store.
 

·
Marine Aquarium Expert/Saltwater Section Mgr.
Joined
·
355 Posts
Discussion Starter · #7 ·
Thanks for that. *w3
 

·
Registered
Joined
·
943 Posts
I have used both Bandsaws and Tile Saws and unless I am cutting a big piece I prefer a bandsaw and dont get me wrong the bandsaw will cit pieces up to about 3 inches thick I think it was with no real problems. I like the bandsaws for intricate cutting like around polyps.
 

·
Marine Aquarium Expert/Saltwater Section Mgr.
Joined
·
355 Posts
Discussion Starter · #10 ·
Thanks for the info
 
1 - 10 of 10 Posts
Top