FS: CO2 equipment

btimmer30 · 03-20-2011, 12:06 PM

I have CO2 parts from Clippard available to sell.

I have solenoid valves, needles valves, check valves, CO2 proof tubing, and all fittings needed to put them on a regulator. I can also pre-build a kit with these parts to put directly on your regulator.

These parts are all steel, top of the line, made by clippard. The prices are for 2-3 day shipping within the U.S. Contact me if you are outside the U.S.
NOTE: you must have industrial CO2 tubing 1/8 ID spec to use with this kit which I supply.

Solenoid valve - $30 shipped
Needle valve - $20 shipped
Check valve - $12 shipped
Clippard CO2 Tubing - 5 ft/ $8 shipped

A body kit with the above parts, including all fittings, and pre-assembled with pipe sealant will cost $60 shipped. If you want a different combination of parts, contact me for a price.

James0816 · 03-21-2011, 07:03 AM

Do you have any manifolds?

susankat · 03-21-2011, 08:00 AM

Thats some good prices. Wish I had the money right now. Maybe later though.

btimmer30 · 03-29-2011, 10:04 PM

update: I will have to charge $35 shipped for the solenoids

03-20-2011, 12:06 PM	#1 (permalink)
btimmer30 Join Date: Mar 2011 Posts: 3 Name: Bill Timmer Feedback: 0 / 0% Said "Welcome to Aquarium Forum" 0 Times Said "Thanks" 0 Times Was Thanked 1 Time in 1 Post	FS: CO2 equipment I have CO2 parts from Clippard available to sell. I have solenoid valves, needles valves, check valves, CO2 proof tubing, and all fittings needed to put them on a regulator. I can also pre-build a kit with these parts to put directly on your regulator. These parts are all steel, top of the line, made by clippard. The prices are for 2-3 day shipping within the U.S. Contact me if you are outside the U.S. NOTE: you must have industrial CO2 tubing 1/8 ID spec to use with this kit which I supply. Solenoid valve - $30 shipped Needle valve - $20 shipped Check valve - $12 shipped Clippard CO2 Tubing - 5 ft/ $8 shipped A body kit with the above parts, including all fittings, and pre-assembled with pipe sealant will cost $60 shipped. If you want a different combination of parts, contact me for a price.

03-21-2011, 07:03 AM	#2 (permalink)
James0816 James0816's Photo Gallery Join Date: Jun 2009 Posts: 2,455 Feedback: 13 / 100% Said "Welcome to Aquarium Forum" 0 Times Said "Thanks" 34 Times Was Thanked 526 Times in 454 Posts	Re: FS: CO2 equipment Do you have any manifolds?

03-21-2011, 08:00 AM	#3 (permalink)
susankat Pleco n bn breeder n BOSS susankat's Photo Gallery Join Date: Nov 2008 Posts: 5,419 Name: Susan Location: Tulsa, Ok Feedback: 9 / 100% Said "Welcome to Aquarium Forum" 4,150 Times Said "Thanks" 1,611 Times Was Thanked 1,808 Times in 1,549 Posts	Re: FS: CO2 equipment Thats some good prices. Wish I had the money right now. Maybe later though. __________________ SUCCESS IS MEASURED BY YEARS, NOT MONTHS!!! 220 Tank build http://www.aquariumforum.com/f15/sta...late-3253.html

03-29-2011, 10:04 PM	#4 (permalink)
btimmer30 Join Date: Mar 2011 Posts: 3 Name: Bill Timmer Feedback: 0 / 0% Said "Welcome to Aquarium Forum" 0 Times Said "Thanks" 0 Times Was Thanked 1 Time in 1 Post	Re: FS: CO2 equipment update: I will have to charge $35 shipped for the solenoids

Members currently in the chatroom: 0
	The most chatters online in one day was 16, 03-02-2012. No one is currently using the chat.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)