 |
Advertise |
|||||||||||
|
||||||||||||
|
|
||||||||
|
Welcome to the Aquarium Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast and simple so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. 
OR |
Members currently in the chatroom: 5
|
|
 |
The most chatters online in one day was 16, 03-02-2012. Vampa, Euruproctos, TaylorM237, susankat, clep.berry |
 |
|
|
LinkBack | Thread Tools |
07-31-2011, 04:40 PM
|
#1 (permalink) |
|
Wild betta tamer
 
Said "Welcome to Aquarium Forum" 2,733 Times
Said "Thanks" 547 Times
Was
Thanked 1,127 Times in 1,012 Posts
|
switching glass
I have a question for the forum.I have a crappy 29 outside,and a 20 long.The 20 long front is cracked and I have been wanting to fix this.I want to get the bottom off the 29 and use it(I measured,it will fit)I have removed the silicon inside and out of the bottom,but cant get get a razor knife between the panes of glass.Any easier way I can do this?Hubbs wont let me use too much force,hes scared Ill get hurt.I also need tips on pulling the trim off the top and bottom of the 20 long.
insight,tips,tricks ect ect appreciated.
__________________
http://bountifulbettas.blogspot.com/ "Come to the dark side....we have cookies...and filters/heaters/and water changes!" |
|
|
 | Join AquariumForum.com Today - It's Free! Are you an aquarium enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more. |
|
Sponsors |
|
08-01-2011, 01:48 PM
|
#2 (permalink) |
|
What do fish think about?
Said "Welcome to Aquarium Forum" 183 Times
Said "Thanks" 451 Times
Was
Thanked 603 Times in 573 Posts
|
Re: switching glass
If you can talk him into it, a sharpened putty knife and maybe a rubber mallet on the end or the handle of a screwdriver (held from the tip and swung like a hammer) will get the putty knife's blade under the glass. Make sure you tap it in all the way around BEFORE you try and pry it up, or you will more than likely break something.
Just my thoughts though, I've never tried it...
__________________
Officially fishless until after the move....tune in later for details! |
|
|
