![]() |
Advertise |
|||||||||||||
|
||||||||||||||
|
|
||||||||
|
Welcome to the Aquarium Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
Members currently in the chatroom: 0
|
|
![]() |
The most chatters online in one day was 8, 11-19-2008. No one is currently using the chat. |
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) |
|
Welcomes: 0
Thanks: 0
Thanked 0 Times in 0 Posts
|
Just wanted to say hi to everyone as I am new to the site and ask a few questions for a tank I just picked up. I got a 60 gallon long tank that I planned to set on a dresser as a stand but it is too small, the tank is hangs over about 2 inches on each end. Will this be ok or will it damage the tank when filled with water. Also I already have an established 45 gallon tank in the same room. What would be the best way to get the new tank established the fastest?. I was thinking about just taking some water from the old tank and filling the new tank. Would this be the best idea? Thanks alot guys, Chris.
|
|
|
|
|
|
#2 (permalink) |
Welcomes: 6
Thanks: 18
Thanked 12 Times in 10 Posts
|
i would suggest running a sponge filter in the established tank for about a week's time and also as you add that dirty sponge to the new tank you can take some of the the filter material from the established tank and squeeze it into the new filter or you could be like me and run the new filter on the established tank for a while before you set up the new tank.
As far as the tank on the dresser, the overhang on the 2 sides may cause undue stress on the bottom of the tank and it is important to have support along all the edges of the tank. |
|
|
|
|
|
#4 (permalink) |
Welcomes: 6
Thanks: 18
Thanked 12 Times in 10 Posts
|
I was given that suggestion for a 75 gallon tank and it was frowned upon due to safety issues, but since in this case he needs length it should be okay.
|
|
|
|
| Said thanks: |
|
|
#5 (permalink) |
Welcomes: 121
Thanks: 25
Thanked 83 Times in 76 Posts
|
extending the base (or surface area) where the tank sits id better than letting it float out in the air, but it still has no support for the edges of the tank. Jbar is correct it will put undo stress in the tank, and you run a risk of the tank cracking. It should work but IMO I wouldn't do it. I have seen tanks that were bowed and twisted becuase of a poor support for the tank and they never broke, but than I had talk to people that one day they wole up to a room full of water and tank full of dead fish as will....
Personally I would find a spot were the tank has the proper support.... but hey thats just me |
|
|
|
|
|
#6 (permalink) |
|
Welcomes: 7
Thanks: 0
Thanked 8 Times in 8 Posts
|
just make sure its real plywood and not that osb board. i wouldnt do this myself, but its your tank.
__________________
red sky at morning, sailor take warning. red sky at night, sailors delight. |
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|